于新海

1972年12月生,男,博士,华东理工大学机械与动力工程学院, 研究员,博士生导师。承压系统安全科学教育部重点实验室学术骨干,“全国安全阀标准委员会委员”,“全国化工设备设计技术中心站搅拌工程技术委员会”技术委员。1999年7月华东理工大学硕士毕业后留校任教。2006年3月获得化工过程机械博士学位。2006年被评为副研究员。2011年被评为博士生导师。2012年被评为研究员。2012年赴美国University of Southern California(USC)的Mork Family Department of Chemical Engineering and Materials Science访问交流一年。


联系电话:021-64253708


邮箱:yxhh@ecust.edu.cn


研究方向

基于电动汽车的能源系统研究


新能源技术


核电装备


承担科研项目

作为项目负责人(第一)主持的科研项目主要有国家自然科学基金项目(面上2项、青年1项)、863课题,教育部新世纪优秀人才支持计划项目、上海市教委产学研项目、企业委托开发项目等。 作为第一作者或通讯作者近年来发表SCI论文四十余篇,引用610次, ESI论文2篇。授权发明专利6项。


在阀门研究方面,与东吴市机械有限责任公司经过合作,攻克了诸多核电安全阀难题,建成国内首台首套复合ASME的安全阀热态试验装置,耗资6000万元。成功进行了巴基斯坦C3、K3、中国核电AP1000项目安全阀的试验,得到获得了试验现场巴基斯坦核安全局、中国核安全局、上海核工程研究设计院、中国中原对外工程有限公司、中国核动力研究设计院的专家的一致好评。 在此基础上,攻克了安全阀瞬态模拟技术,和试验结果相比对,澄清了长期以来在安全阀行业许多的存在争议的问题。同时成功实现了5台核电关键安全阀的国产化,2014年底为企业创造了6000万元的经济效益。5台核电安全阀的国产化有利地保证了我国核电的安全运行,摆脱了核电安全阀长期以来进口的局面,具有重要的社会价值。


目前担任德兰新能源-华东理工大学联合实验室主任,担任方正阀门-华东理工大学联合实验室主任。

获奖成果

2007年获得上海市优秀博士论文。

2008年上海高校优秀青年教师后备人选。

2009年被Elsevier 出版社评为最佳审稿人。

2010年教育部新世纪优秀人才。

2011年度高等学校科学研究优秀成果奖(科技进步)二等奖, 教育部.

代表性著作

表性论文


[1] Tang J, Yu X, Wang Z, et al. Electron and ion kinetics in three-dimensional confined microwave-induced microplasmas at low gas pressures[J]. Aip Advances, 2016, 6(4):373.


[2] Sun Q, Li H, Yan J, Liu L, Yu Z, Yu X. Selection of appropriate biogas upgrading technology-a review of biogas cleaning, upgrading and utilisation[J]. Renewable & Sustainable Energy Reviews, 2015, 51:521-532.


[3] Tuo Y, Jiang H, Li X, Shi L, Yu X, Li P. Kinetic behavior of Pt catalyst supported on structured carbon nanofiber bed during hydrogen releasing from decalin[J]. International Journal of Hydrogen Energy, 2016, 41(25):10755-10765.


[4] Li X, Tuo Y, Jiang H, Duan X, Yu X. Engineering Pt/carbon-nanofibers/carbon-paper composite towards highly efficient catalyst for hydrogen evolution from liquid organic hydride[J]. International Journal of Hydrogen Energy, 2015, 40(36):12217-12226.


[5] Tang J, Cai C, Ming X, Yu X, Zhao S, Tu S, Liu H. Morphology and stress at silicon-glass interface in anodic bonding[J]. Applied Surface Science, 2016, 387:139-148.


[6] Yu W, Tao J, Yu X, et al. A microreactor with superhydrophobic Pt–Al2O3 catalyst coating concerning oxidation of hydrogen off-gas from fuel cell[J]. Applied Energy, 2016.


[7] Lin Y, Yu X*, Wang Z, et al. Effect of Laser-Induced Heating on Raman Measurement within a Silicon Microfluidic Channel[J]. Micromachines, 2015, 6(7): 813-830.


[8] Yu X*, An L, Yang J, et al. CO2 capture using a superhydrophobic ceramic membrane contactor[J]. Journal of Membrane Science, 2015, 496: 1-12.


[9] Yu X*, Yang J, Lu H, et al. Energy-efficient extraction of fuel from Chlorella vulgaris by ionic liquid combined with CO2 capture[J]. Applied Energy, 2015.


[10] Yang J*, Yu X, Yan J, et al. CO2 capture using amine solution mixed with ionic liquid[J]. Industrial & Engineering Chemistry Research, 2014, 53(7): 2790-2799.


[11] Deng W, Yu X, Sahimi M, et al. Highly permeable porous silicon carbide support tubes for the preparation of nanoporous inorganic membranes[J]. Journal of Membrane Science, 2014, 451: 192-204.


[12] Huang J, Yang J, Yu X*, et al. Energy-efficient Extraction of Fuel from Chlorella Combined with CO 2 Capture[J]. Energy Procedia, 2014, 61: 2805-2808.


[13] Yu W, Yu X*, Tu S T. Oxidation of Hydrogen Off-gas from a Fuel Cell Using a Microstructured Reactor with Hydrophobic Pt-Al2O3 Catalyst Coating[J]. Energy Procedia, 2014, 61: 2854-2857.


[14] Yang J, Yu X*, Yan J, et al. CO2 Capture Using Absorbents of Mixed Ionic and Amine Solutions[J]. Energy Procedia, 2014, 61: 2849-2853.


[15] Ai L, Yu X*, Jiang W, et al. Residual Stress Distribution in Hard-Facing of Pressure Relief Valve Seat[J]. Journal of Pressure Vessel Technology, 2014, 136(6): 061403.


[16] Yang J, Yu X*, Yan J, et al. Effects of SO2 on CO2 capture using a hollow fiber membrane contactor[J]. Applied Energy, 2013, 112: 755-764.


[17] Yu X*, Yu W, Li H, et al. Preparation, characterization and application of K-PtCo/Al2O3 catalyst coatings for preferential CO oxidation[J]. Applied Catalysis B: Environmental, 2013, 140: 588-597.


[18] 杨金龙, 赖焕新, 于新海,等. 一种高速剪切搅拌器内流场的研究[C]// 中国工程热物理学会. 2012.


[19] Wen Z, Yu X, Tu S T, et al. Catalytic Biodiesel Production[J]. Air Pollution Prevention and Control: Bioreactors and Bioenergy, 2013: 383-397.


[20] 杨金龙, 赖焕新, 于新海,等. 低比速离心泵半开式叶轮内流场的模拟[J]. 工程热物理学报, 2011, 02期.


[21] Lv Y, Yu X, Tu S T, et al. Experimental studies on simultaneous removal of CO2 and SO2 in a polypropylene hollow fiber membrane contactor[J]. Applied Energy, 2012, 97: 283-288.


[22] Lin Y, Yu X*, Wang Z, et al. Laminar flow diffusion interface control in a microchannel with accurate Raman measurement[J]. Chemical Engineering and Processing: Process Intensification, 2012, 57: 1-7.


[23] Weiling Luan, Hongwei Yang, Zhen Wan, Binxia Yuan, Xinhai Yu, Shan-tung Tu. Mercaptopropionic acid capped CdSe/ZnS quantum dots as fluorescence probe for lead (II)[J]. Journal of Nanoparticle Research, 2012, 14(3): 1-8.


[24] Lv Y, Yu X*, Jia J, et al. Fabrication and characterization of superhydrophobic polypropylene hollow fiber membranes for carbon dioxide absorption[J]. Applied Energy, 2012, 90(1): 167-174.


[25] Lin Y, Yu X*, Wang Z, et al. Design and evaluation of an easily fabricated micromixer with three-dimensional periodic perturbation[J]. Chemical Engineering Journal, 2011, 171(1): 291-300.


[26] Yu X*, Wen Z, Li H, et al. Transesterification of Pistacia chinensis oil for biodiesel catalyzed by CaO–CeO2 mixed oxides[J]. Fuel, 2011, 90(5): 1868-1874.


[27] Yu X*, Li H, Tu S T, et al. Pt–Co catalyst-coated channel plate reactor for preferential CO oxidation[J]. International journal of hydrogen energy, 2011, 36(5): 3778-3788.


[28] Wen Z, Yu X*, Tu S T, et al. Biodiesel production from waste cooking oil catalyzed by TiO2–MgO mixed oxides[J]. Bioresource Technology, 2010, 101(24): 9570-9576.


[29] Yu X*, Wen Z, Lin Y, et al. Intensification of biodiesel synthesis using metal foam reactors[J]. Fuel, 2010, 89(11): 3450-3456.


[30] Li H, Yu X*, Tu S T, et al. Catalytic performance and characterization of Al2O3-supported Pt–Co catalyst coatings for preferential CO oxidation in a micro-reactor[J]. Applied Catalysis A: General, 2010, 387(1): 215-223.


[31] Tu S T, Yu X, Luan W, et al. Development of micro chemical, biological and thermal systems in China: a review[J]. Chemical Engineering Journal, 2010, 163(3): 165-179.


[32] Lv Y, Yu X*, Tu S T, et al. Wetting of polypropylene hollow fiber membrane contactors[J]. Journal of Membrane Science, 2010, 362(1): 444-452.


[33] Lin Y, Yu X*, Wang Z, et al. Measurement of temperature-dependent diffusion coefficients using a confocal Raman microscope with microfluidic chips considering laser-induced heating effect[J]. Analytica chimica acta, 2010, 667(1): 103-112.


[34] Wen Z, Yu X*, Tu S T, et al. Synthesis of biodiesel from vegetable oil with methanol catalyzed by Li-doped magnesium oxide catalysts[J]. Applied energy, 2010, 87(3): 743-748.


[35] Yuan Yao, Wenyong Dong, Shenmin Zhu, Xinhai Yu§ and Deyue Yan. Novel morphology of calcium carbonate controlled by poly (L-lysine)[J]. Langmuir, 2009, 25(22): 13238-13243.


[36] Wen Z, Yu X*, Tu S T, et al. Intensification of biodiesel synthesis using zigzag micro-channel reactors[J]. Bioresource technology, 2009, 100(12): 3054-3060.


[37] Xinhai Y*, Shan-Tung, Zhendong W, et al. Investigation on methanol steam reforming in a microchannel reactor by experiments and mathematical model analysis[J]. International Journal of Green Energy, 2008, 5(4): 281-296.


[38] 姚华堂, 于新海*, 王正东,等. 微反应器中的微制作技术[J]. 微细加工技术, 2006, 第2期:54-60.


[39] Yu X*, Tu S T, Wang Z, et al. Development of a microchannel reactor concerning steam reforming of methanol[J]. Chemical Engineering Journal, 2006, 116(2): 123-132.


[40]袁彪, 于新海*, 王正东,等. 在涂层催化剂上甲醇水蒸气重整的本征动力学研究[J]. 石油化工, 2005, 34(11):1055-1059.


[41] 于新海*, 涂善东, 王正东,等. 甲醇重整微槽道反应器的性能[J]. 华东理工大学学报:自然科学版, 2006, 31(6):792-796.


[42] Yu X*, Tu S T, Wang Z, et al. On-board production of hydrogen for fuel cells over Cu/ZnO/Al 2 O 3 catalyst coating in a micro-channel reactor[J]. Journal of Power Sources, 2005, 150: 57-66.


[43] 于新海*, 涂善东, 王正东,等. 甲醇水蒸气重整微型反应器催化剂涂层的研究[J]. 华东理工大学学报:自然科学版, 2005, 05期(5):653-657.


[44] 于新海*, 王正东, 涂善东,等. Cu/ZnO/CeO2/Al2O3四元涂层催化剂甲醇水蒸气重整本征动力学[J]. 华东理工大学学报:自然科学版, 2006, 第1期(1):103-107.


[45] 杨洁, 严晋跃, 于新海*,等. 基于醇胺+[bmim][BF4]+H2O溶液的CO2捕捉工艺[J]. 华东理工大学学报:自然科学版, 2013, 39(6):641-647.


[46] 于新海*, 王正东, 涂善东,等. Cu/ZnO/Al2O3催化剂涂层工艺参数的优化[J]. 太阳能学报, 2005, 第4期(4):556-562.


[47] 于新海*, 涂善东, 王正东,等. 甲醇重整微槽道反应器加工工艺的研究[J]. 电池, 2006, 04期(4):305-307.


[48] 李宏亮, 董红微, 于新海*,等. PtCoK/Al2O3催化剂涂层选择性氧化脱除富氢气氛中的CO[J]. 精细化工, 2011, 第4期(4):359-363.


[49] 吕月霞, 于新海*, 涂善东. 膜气吸收法分离烟气中CO2的实验[J]. 南京工业大学学报:自然科学版, 2009, 第5期:96-101.


网页发布时间: 2019-05-16