章兰珠

章兰珠  博士,博士生导师

职称: 教授
 







个人简介:

     1989.9---1993.7 华东理工大学机械工程学院 本科
     1993.9---1996.7 华东理工大学机械工程学院 化工机械专业  硕士
     1996.7---2000.7 华东理工大学机械工程学院 助教,讲师

     2000.8---2005.1 柏林工业大学交通工程与应用机械系 DAAD奖学金  工学博士

     2005.1---2007.8 华东理工大学机械与动力工程学院 讲师

     2007.9---2016.9 华东理工大学机械与动力工程学院  副教授

     2016.9---至今 华东理工大学机械与动力工程学院  教授

                   

 

联系方法:
实验十七楼409,64253036,lzzhang@ecust.edu.cn

研究方向

智能传感与检测;密封技术与材料;机电一体化

 

承担科研项目

主持国家项目:

  国家自然科学基金面上项目3项(51275171;51675183;51975213);

  国家重点研发项目课题1项(2020YFB2008001);

  国家重点研发项子课题3项(2018YFC0808603-2;2017YFF0210405-3;2023YFC3010501-07);

主持省部级项目:

  国家质检总局公益性项目;教育部高校基本科研业务费探索研究基金项目;教育部博士点青年教师基金项目;上海科委创新平台项目;上海科委标准立项等;

主持企业项目:

  中国核动力研究设计院、中车集团、中国石化、上海石化、上海电气等。

获奖成果

机械工业科技进步二等奖;

上海市科技进步三等奖二次;

上海市优秀标准化成果二等奖;

无锡市科技进步三等奖

     

代表性著作

专著:

Lanzhu ZHANG. Erschuetterungs- und Koerperschallschutz in Kraftfahrzeugen mittels eines neu konzipierten adaptiven Elastomerlagers, Aachen (2005), Shaker Verlag, ISBN 3-8322-3531-0.


代表性论文:

[1]Yibang Zhou, Xiaoyong Wang and Lanzhu Zhang. Research on Assembly Method of Threaded Fasteners Based on Visual and Force Information. Processes 2023, 11(6), 1770;

[2]Lanzhu Zhang, Linzhen Zhang, Xin Lu and Luyi Guo. Three-Dimensional Reconstruction and Seepage   Simulation of Vermiculite Materials Based on CT Technology. Processes, 2023, Volume 11, Issue 10, 3015. 

[3]Zhou Yibang, Wang Xiaoyong, Zhang Lanzhu*.Visual identification and pose estimation algorithms of nut tightening robot system. Int J Adv Manuf Technol,Vol. 127 , 11-12 . 2023.7. PP 5307-5326. 

[4]Xu Haiming and Li Yong and Zhang Lanzhu. A New Control Method for Backlash Error Elimination of Pneumatic Control Valve[J]. Processes, 2021,9(8):1378-1378.

[5]Yue, Chang, Bitian, Sun, Lanzhu, Zhang. Leakage performance predictions of a brush seal based on fluid-solid coupling method. SCIENCE PROGRESS. 2020, Vol. 103, Issue 1, 1-17.

[6]Lanzhu Zhang and Guangkai Xiao. Analysis of the metal-to-metal contact flange joint subject to external bending moment[J]. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2019, 233(2) : 234-241.

[7]Bi, Lewen; Zhang, Lanzhu. Three-dimensional numerical analysis for bolted flange joints considering effect of creep. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, v 3A, 2018, ASME 2018 Pressure Vessels and Piping Conference, PVP 2018

[8]Chaowen Zhu,Lanzhu Zhang. Development of Visualization System for Valve Sealing Evaluation[A]. Institute of Management Science and Industrial Engineering.Proceedings of 2018 3rd International Conference on Materials Science,Machinery and Energy Engineering(MSMEE 2018)[C].

[9]Lanzhu Zhang and Jiachao Sun and Renliang Cai. Study on the gasket parameters and the calculation of MMC flange joint according to XP CEN\TS 1591-3[J]. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2017, 231(6) : 1174-1186.

[10]Lanzhu Zhang and Jiachao Sun and Renliang Cai. Study on the gasket parameters and the calculation of MMC flange joint according to XP CEN\TS 1591-3[J]. Proceedings of the Institution of Mechanical Engineers, 2017, 231(6) : 1174-1186.

[11]Kai Ma et al. Behavior of bolted joints with metal-to-metal contact type gaskets under bolting-up and loading conditions[J]. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2016, 230(4) : 284-291.

[12]Kai Ma et al. Behavior of bolted joints with metal-to-metal contact type gaskets under bolting-up and loading conditions[J]. Proceedings of the Institution of Mechanical Engineers, 2016, 230(4)

[13] Ping Wu,Lanzhu Zhang,Chaowen Zhu. Research on The Characterization Methods of The Sealing Performance of The Bolted Flange Joints Under The Dynamic Loads[A]. Proceedings of 2016 6th International Conference on Machinery, Materials, Environment, Biotechnology and Computer(MMEBC 2016)[C].(Computer Science and Electronic Technology International Society),2016:6.

[14]吴思远,陈冉,章兰珠.高温螺栓法兰系统长时密封性能模拟计算[J].润滑与密封,2024,49(12):118-126.

[15]郭璐怡,章兰珠.石墨金属缠绕垫的孔隙结构分析与泄漏模拟[J/OL].润滑与密封,1-10[2024-10-09].

[16]卢秉伦,章兰珠,陈威.法兰螺栓紧固力超声测量研究[J].机械设计与制造,2024,(02):261-265. 

[17]韩文翔,章兰珠.基于时差定位法的管道多点泄漏定位研究[J].振动与冲击,2022,41(24):210-217.

[18]徐海铭,李勇,章兰珠等.基于深度可分离卷积神经网络轴承剩余寿命预测[J].机械强度,2022,44(04):763-771.

[19]李颖,章兰珠.基于梯度函数的仿生骨支架建模与评价[J].计算机仿真,2022,39(04):381-386+449.

[20]张曦,章兰珠.声发射衰减特性管道泄漏定位方法[J].应用声学,2022,41(01):158-167.


主编/参编标准:

[1]全国管路附件标准化技术委员会(SAC/TC 237).管法兰用垫片密封性能试验方法:GB/T 12385-2025[S].中国标准出版社,2025.

[2]全国管路附件标准化技术委员会(SAC/TC 237).基于泄漏率的管法兰用垫片参数测试方法:GB/T 45182-2025[S].中国标准出版社,2025.

[3]全国管路附件标准化技术委员会(SAC/TC 237).管法兰用柔性石墨复合增强垫片 第1部分:PN系列:GB/T 19675.1-2023[S].中国标准出版社,2023.

[4]全国管路附件标准化技术委员会(SAC/TC 237).钢制管法兰、垫片及紧固件选用规定 第1部分:PN系列:GB/T 43079.1-2023[S].中国标准出版社,2023.

[5]全国管路附件标准化技术委员会(SAC/TC 237).管法兰用柔性石墨复合增强垫片 第2部分:Class系列:GB/T 19675.2-2023[S].中国标准出版社,2023.

[6]全国管路附件标准化技术委员会(SAC/TC 237).钢制管法兰、垫片及紧固件选用规定 第2部分:Class系列:GB/T 43079.2-2023[S].中国标准出版社,2023.

[7]全国管路附件标准化技术委员会(SAC/TC 237).管法兰用缠绕式垫片 第1部分:PN系列:GB/T 4622.1-2022[S].中国标准出版社,2022.

[8]全国管路附件标准化技术委员会(SAC/TC 237).管法兰用缠绕式垫片 第2部分:Class系列:GB/T 4622.2-2022[S].中国标准出版社,2022.

[9]全国管路附件标准化技术委员会(SAC/TC 237).管法兰用金属波齿复合垫片 第1部分:PN系列:GB/T 19066.1-2020[S].中国标准出版社,2020.

[10]全国管路附件标准化技术委员会(SAC/TC 237).管法兰用金属波齿复合垫片 第2部分:Class系列:GB/T 19066.2-2020[S].中国标准出版社,2020.




网页发布时间: 2019-05-16