|
|
张剑睿
E-mail: jrzhang@ecust.edu.cn
职位: 华东理工大学国家大学科技园 总经理
职称: 讲师、硕导
教育与工作经历:
2023- 华东理工大学 机械与动力工程学院 讲师
2021-2023 华东理工大学 机械与动力工程学院 博士后
2015-2021 华东理工大学 机械与动力工程学院 博士
2018-2021 澳大利亚伍伦贡大学 材料工程 博士（双学位）
2011-2014 华东理工大学 机械与动力工程学院 硕士
2012-2013 英国巴斯大学 航空工程 硕士（双学位）
2007-2011 华东理工大学 机械与动力工程学院 学士
研究方向
主要研究方向：
1. 增材制造（3D打印）
2. 智能装备的开发及产业化应用
3. 智能测试技术及装备研制
担科研项目
中国博士后科学基金特别资助项目，激光选区熔化成形高熵合金微尺度疲劳裂纹扩展行为与寿命预测方法的研究，主持
国家自然科学基金委员会青年项目，高熵合金增材制造结构低温疲劳与冲击的损伤行为研究 ，主持
国家重点研发，金属结构材料服役行为跨尺度损伤规律建模，子课题负责人
上海核工程研究设计院股份有限公司，热管堆结构材料疲劳对蠕变性能的影响试验，主持
上海核工程研究设计院股份有限公司，AG728特厚钢板综合性能试验研究 ，主持
代表性著作
Tao Shen, Bo Li*, Jianrui Zhang, Fuzhen Xuan. Integrated computational materials engineering (ICME) for predicting tensile properties of additively manufactured defect-free single-phase high-entropy alloy. Virtual and Physical Prototyping, 2025, 20(1), e2441947.
Haijie Wang, Jianrui Zhang, Fuzhen Xuan. Machine learning-based fatigue life prediction of laser powder bed fusion additively manufactured Hastelloy X via nondestructively detected defects. International Journal Of Structural Integrity, 2025, 16:1
Guoqing Huang, Bo Li, Jianrui Zhang, Fuzhen Xuan. Multi-material laser powder bed fusion additive manufacturing of dual-phase laminated heterostructure of Cantor high-entropy alloy and Martensitic steel for overcoming strength-ductility trade-off. Additive Manufacturing, 2024, 104618.
Bo Li*, Jiawei Shen, Hongyu Han, Jianrui Zhang*, Yang Gao*, Fuzhen Xuan. Design and 3D printing-assisted fabrication of microwave resonator-based passive wireless sensors for simultaneous measuring high temperatures and pressures. IEEE Sensors Journal, 2024.
Jianjun Yan, Junwei Zhou, Jianrui Zhang, Peng Zhao, Ziang Zhang, Weize Wang, Fuzhen Xuan*. AP-GAN-DNN based creep fracture life prediction for 7050 aluminum alloy. Engineering Fracture Mechanics, 2024: 303
Haijie Wang, Jianrui Zhang*, Bo Li*, Fuzhen Xuan. Machine learning-based fatigue life prediction of laser powder bed fusion additively manufactured Hastelloy X via nondestructively detected defects. International Journal of Structural Integrity, 2024
Tao Shen, Bo Li*, Jianrui Zhang, Fuzhen Xuan. Multi-source information fusion for enhanced in-process quality monitoring of laser powder bed fusion additive manufacturing. Additive Manufacturing, 2024, 104575.
Bo Li*, Jianrui Zhang*, Tianxiang Deng, Facai Ren. Convertible Thermal Meta-Structures via Hybrid Manufacturing of Stereolithography Apparatus 3D Printing and Surface Metallization for Thermal Flow Manipulation. Polymers, 2023, 15: 174
Bo Qian, Hongri Fan, Jianrui Zhang*, Fast calculation algorithm for region recognition and model interference ratio in the STL model based on voxel mapping decoupling. International Journal of Advanced Manufacturing Technology, 2022: 119(3-4).
Bo Qian, Hongri Fan, Jianrui Zhang*, Gang Liu, Pei Li, Heat Exchanging Grid Structures Based on Laser-Based Powder Bed Fusion: Formation Process and Boiling Heat Transfer Performance. Energies, 2022: 15(5).
Jianrui Zhang, Yabin Yan*, Bo Li*. Selective Laser Melting (SLM) Additively Manufactured CoCrFeNiMn High-Entropy Alloy: Process Optimization, Microscale Mechanical Mechanism, and High-Cycle Fatigue Behavior. Materials, 2022, 15: 8560.
Jianrui Zhang, Bo Li*. The Influence of Laser Powder Bed Fusion (L-PBF) Process Parameters on 3D-Printed Quality and Stress–Strain Behavior of High-Entropy Alloy (HEA) Rod-Lattices. Metals, 2022, 12: 2109.
Bo Qian, Hongri Fan, Jianrui Zhang*, Gang Liu, Pei Li, Microchannel Liquid-Cooled Heat Exchanger Based on a Nonuniform Lattice:Study on Structure Calculation, Formation Process, and Boiling Heat Transfer Performance. Materials, 2021: 14(23).
Bo Li, Bo Qian, Yi Xu, Zhiyuan Liu, Jianrui Zhang, Fuzhen Xuan*. Additive manufacturing of ultrafine-grained austenitic stainless steel matrix composite via vanadium carbide reinforcement addition and selective laser melting: Formation mechanism and strengthening effect. Materials Science & Engineering A, 2019, 745: 495-508.